#include "LaunchPage.h" #include "ui_LaunchPage.h" #include #if CONFIG_EN_SUB_THREAD //是否开启子进程 #include SubThread LP_ST; #endif LaunchPage::LaunchPage(QWidget *parent) : QWidget(parent) , ui(new Ui::LaunchPage) { ui->setupUi(this); setWindowFlag(Qt::FramelessWindowHint); // 设置窗口无边框，设置后窗口无法移动 setAttribute(Qt::WA_TranslucentBackground, true); TrayIconInit(); /* ============= 2. 延迟创建子页面 ============= */ m_delayInitTimer = new QTimer(this); m_delayInitTimer->setSingleShot(true); connect(m_delayInitTimer, &QTimer::timeout, this, &LaunchPage::createPages); m_delayInitTimer->start(100); // 0 ms 即可，让事件循环先跑一帧 WinInit(); #if CONFIG_EN_SUB_THREAD //是否开启子进程 LP_ST.start(); #endif } LaunchPage::~LaunchPage() { #if CONFIG_EN_SUB_THREAD //是否开启子进程 LP_ST.KillThread(); #endif delete ui; } void LaunchPage::TrayIconInit() { //托盘初始化 QIcon icon = QIcon("logo.png"); trayIcon = new QSystemTrayIcon(this); trayIcon->setIcon(icon); trayIcon->setToolTip("郑煤机-掘锚一体机"); trayIcon->show(); //必须调用，否则托盘图标不显示 //创建菜单项动作(以下动作只对windows有效) minimizeAction = new QAction("隐藏", this); connect(minimizeAction, SIGNAL(triggered()), this, SLOT( hide() )); //绑定信号槽 restoreAction = new QAction("还原", this); connect(restoreAction, SIGNAL(triggered()), this, SLOT( showNormal() )); quitAction = new QAction("退出", this); connect(quitAction, &QAction::triggered, this, [this]() { // 退出应用程序 qApp->quit(); }); //创建托盘菜单(必须先创建动作，后添加菜单项，还可以加入菜单项图标美化) trayIconMenu = new QMenu(this); trayIconMenu->addAction(minimizeAction); trayIconMenu->addAction(restoreAction); trayIconMenu->addSeparator(); trayIconMenu->addAction(quitAction); trayIcon->setContextMenu(trayIconMenu); // connect(trayIcon,SIGNAL(activated(QSystemTrayIcon::ActivationReason)), // this,SLOT(iconActivated(QSystemTrayIcon::ActivationReason))); } void LaunchPage::createPages(){ /* ============= 1. 只把主窗口 show 出来 ============= */ ui->LoaderList->addItem("窗口创建->正在创建公共窗口..."); P00_PublicPage *pubWin = new P00_PublicPage(this); pubWin->setObjectName("pubWin"); pubWin->setStyleSheet("background-color: transparent;"); ui->LoaderList->addItem("窗口布局->正在共享窗口布局..."); // 获取PublicWin中的scrollArea QScrollArea *scrollArea = pubWin->findChild("scrollArea"); bool isNewScrollArea = false; if (!scrollArea) { // 如果找不到scrollArea，创建新的并添加到PublicWin布局 scrollArea = new QScrollArea(pubWin); scrollArea->setObjectName("scrollArea"); isNewScrollArea = true; qDebug() << "创建新的scrollArea"; } ui->LoaderList->addItem("窗口属性->正在设置窗口属性..."); scrollArea->setStyleSheet("background-color: transparent; border: none;"); // 配置滚动区域属性 scrollArea->setHorizontalScrollBarPolicy(Qt::ScrollBarAsNeeded); scrollArea->setVerticalScrollBarPolicy(Qt::ScrollBarAlwaysOff); scrollArea->setWidgetResizable(false); // 关键：保持内容原始尺寸以实现横向滚动 scrollArea->setStyleSheet("border: none;"); // 创建容器部件 - 用于承载水平排列的窗口 QWidget *container = new QWidget(); container->setObjectName("scrollContainer"); container->setStyleSheet("background-color: transparent;"); // 使用水平布局 QHBoxLayout *hLayout = new QHBoxLayout(container); hLayout->setSpacing(10); // 窗口之间的间距 hLayout->setContentsMargins(0, 0, 0, 0); // 容器内边距 // 创建并添加子窗口，不设置固定大小 P01_MianPage *p01 = new P01_MianPage (container); ui->LoaderList->addItem("窗口创建->P01_MianPage窗口..."); P02_ShieldPage *p02 = new P02_ShieldPage (container); ui->LoaderList->addItem("窗口创建->P02_ShieldPage窗口..."); P301_PumpPage *p301 = new P301_PumpPage (container); ui->LoaderList->addItem("窗口创建->P301_PumpPage窗口..."); P401_CuttingPage *p401 = new P401_CuttingPage (container); ui->LoaderList->addItem("窗口创建->P401_CuttingPage窗口..."); P501_LoaderPage *p501 = new P501_LoaderPage (container); ui->LoaderList->addItem("窗口创建->P501_LoaderPage窗口..."); P601_TransportPage *p601 = new P601_TransportPage (container); ui->LoaderList->addItem("窗口创建->P601_TransportPage窗口..."); P07_CylinderPage *p07 = new P07_CylinderPage (container); ui->LoaderList->addItem("窗口创建->P07_CylinderPage窗口..."); P08_AlarmPage *p08 = new P08_AlarmPage (container); ui->LoaderList->addItem("窗口创建->P08_AlarmPage窗口..."); P09_RemotePage *p09 = new P09_RemotePage (container); ui->LoaderList->addItem("窗口创建->P09_RemotePage窗口..."); P10_IntelligentPage *p10 = new P10_IntelligentPage (container); ui->LoaderList->addItem("窗口创建->P10_IntelligentPage窗口..."); P11_IsolationPage *p11 = new P11_IsolationPage (container); ui->LoaderList->addItem("窗口创建->P11_IsolationPage窗口..."); P12_NetworkPage *p12 = new P12_NetworkPage (container); ui->LoaderList->addItem("窗口创建->P12_NetworkPage窗口..."); P13_InsPage *p13 = new P13_InsPage (container); ui->LoaderList->addItem("窗口创建->P13_InsPage窗口..."); P14_AtlasPage *p14 = new P14_AtlasPage (container); ui->LoaderList->addItem("窗口创建->P14_AtlasPage窗口..."); P15_ParameterPage *p15 = new P15_ParameterPage (container); ui->LoaderList->addItem("窗口创建->P15_ParameterPage窗口..."); P16_SettingPage *p16 = new P16_SettingPage (container); ui->LoaderList->addItem("窗口创建->P16_SettingPage窗口..."); // 让子窗口使用自身的首选大小 p01->setSizePolicy(QSizePolicy::Preferred, QSizePolicy::Preferred); p02->setSizePolicy(QSizePolicy::Preferred, QSizePolicy::Preferred); p301->setSizePolicy(QSizePolicy::Preferred, QSizePolicy::Preferred); p401->setSizePolicy(QSizePolicy::Preferred, QSizePolicy::Preferred); p501->setSizePolicy(QSizePolicy::Preferred, QSizePolicy::Preferred); p601->setSizePolicy(QSizePolicy::Preferred, QSizePolicy::Preferred); p07->setSizePolicy(QSizePolicy::Preferred, QSizePolicy::Preferred); p08->setSizePolicy(QSizePolicy::Preferred, QSizePolicy::Preferred); p09->setSizePolicy(QSizePolicy::Preferred, QSizePolicy::Preferred); p10->setSizePolicy(QSizePolicy::Preferred, QSizePolicy::Preferred); p11->setSizePolicy(QSizePolicy::Preferred, QSizePolicy::Preferred); p12->setSizePolicy(QSizePolicy::Preferred, QSizePolicy::Preferred); p13->setSizePolicy(QSizePolicy::Preferred, QSizePolicy::Preferred); p14->setSizePolicy(QSizePolicy::Preferred, QSizePolicy::Preferred); p15->setSizePolicy(QSizePolicy::Preferred, QSizePolicy::Preferred); p16->setSizePolicy(QSizePolicy::Preferred, QSizePolicy::Preferred); hLayout->addWidget(p01); ui->LoaderList->addItem("窗口载入布局->P01_MianPage 窗口..."); hLayout->addWidget(p02); ui->LoaderList->addItem("窗口载入布局->P02_ShieldPage 窗口..."); hLayout->addWidget(p301); ui->LoaderList->addItem("窗口载入布局->P301_PumpPage 窗口..."); hLayout->addWidget(p401); ui->LoaderList->addItem("窗口载入布局->P401_CuttingPage 窗口..."); hLayout->addWidget(p501); ui->LoaderList->addItem("窗口载入布局->P501_LoaderPage 窗口..."); hLayout->addWidget(p601); ui->LoaderList->addItem("窗口载入布局->P601_TransportPage 窗口..."); hLayout->addWidget(p07); ui->LoaderList->addItem("窗口载入布局->P07_CylinderPage 窗口..."); hLayout->addWidget(p08); ui->LoaderList->addItem("窗口载入布局->P08_AlarmPage 窗口..."); hLayout->addWidget(p09); ui->LoaderList->addItem("窗口载入布局->P09_RemotePage 窗口..."); hLayout->addWidget(p10); ui->LoaderList->addItem("窗口载入布局->P10_IntelligentPage 窗口..."); hLayout->addWidget(p11); ui->LoaderList->addItem("窗口载入布局->P11_IsolationPage 窗口..."); hLayout->addWidget(p12); ui->LoaderList->addItem("窗口载入布局->P12_NetworkPage 窗口..."); hLayout->addWidget(p13); ui->LoaderList->addItem("窗口载入布局->P13_InsPage 窗口..."); hLayout->addWidget(p14); ui->LoaderList->addItem("窗口载入布局->P14_AtlasPage 窗口..."); hLayout->addWidget(p15); ui->LoaderList->addItem("窗口载入布局->P15_ParameterPage 窗口..."); hLayout->addWidget(p16); ui->LoaderList->addItem("窗口载入布局->P16_SettingPage 窗口..."); // 隐藏滚动条（如果需要） scrollArea->setHorizontalScrollBarPolicy(Qt::ScrollBarAlwaysOff); // 水平滚动条按需显示 scrollArea->setVerticalScrollBarPolicy(Qt::ScrollBarAlwaysOff); // 隐藏垂直滚动条 // 设置滚动区域的内容部件 scrollArea->setWidget(container); qDebug()<size(); // 确保scrollArea被正确添加到PublicWin中 if (isNewScrollArea) { // 为PublicWin设置布局（如果没有） if (!pubWin->layout()) { QVBoxLayout *mainLayout = new QVBoxLayout(pubWin); mainLayout->setContentsMargins(0, 0, 0, 0); pubWin->setLayout(mainLayout); } // 将滚动区域添加到布局 pubWin->layout()->addWidget(scrollArea); } // 显示主窗口 pubWin->show(); ui->LoaderList->clear(); } void LaunchPage::WinInit(){ //ui->LoaderList->addItem("读取配置->") PumpConditionConfigFile = ConfigFiles().ReadFile_Csv("./ProgramConfig/UI_油泵界面启停条件_配置.csv"); QList FileData = ConfigFiles().ReadFile_Csv("./ProgramConfig/UI_报警内容文本_配置.csv"); for (int row = 1; row < FileData.size()-1; ++row) { bool ok1,ok2; uint8_t Dev = FileData.at(row)[0].toUInt(&ok1, 16); uint8_t Index = FileData.at(row)[1].toUInt(&ok2, 16); //qDebug()<" + FileData.at(row)[4]; AlarmText[Dev][Index].Troubleshoot = FileData.at(row)[5]; } gPageName["P01"] = "主预览"; gPageName["P02"] = "屏蔽条件"; gPageName["P301"] = "油泵设备"; gPageName["P401"] = "截割设备"; gPageName["P501"] = "装载设备"; gPageName["P601"] = "运输设备"; gPageName["P07"] = "备用设备"; gPageName["P08"] = "故障记录"; gPageName["P09"] = "遥控测试"; gPageName["P10"] = "自动智能"; gPageName["P11"] = "绝缘检测"; gPageName["P12.00"] = "网络拓扑"; gPageName["P12.01"] = "硬件IO 1"; gPageName["P12.02"] = "硬件IO 2"; gPageName["P12.03"] = "硬件IO 3"; gPageName["P12.04"] = "硬件IO 4"; gPageName["P12.05"] = "硬件IO 3"; gPageName["P12.06"] = "操作箱 1"; gPageName["P12.07"] = "操作箱 2"; gPageName["P12.08"] = "操作箱 3"; gPageName["P12.09"] = "操作箱 4"; gPageName["P13"] = "本地控制"; gPageName["P14"] = "随机图册"; gPageName["P15"] = "参数设置"; gPageName["P16"] = "系统设置"; gPageIndexStr = "P01"; // 创建实例（建议全局唯一） ttsManager = new TTSManager(this); }