#include "LaunchPage.h"
#include "ui_LaunchPage.h"
#include <Pages/P00_PublicPage.h>
#include <GlobalDefinitions/Variable.h>
#include <FileOperation/ConfigFiles.h>
#if CONFIG_EN_SUB_THREAD    //是否开启子进程
    #include <Threads/SubThread.h>
    SubThread LP_ST;
#endif
LaunchPage::LaunchPage(QWidget *parent)
    : QWidget(parent)
    , ui(new Ui::LaunchPage)
{
    ui->setupUi(this);
    setWindowFlag(Qt::FramelessWindowHint); // 设置窗口无边框，设置后窗口无法移动
    setAttribute(Qt::WA_TranslucentBackground, true);
    TrayIconInit();
    WinInit();
#if CONFIG_EN_SUB_THREAD    //是否开启子进程
    LP_ST.start();
#endif
}

LaunchPage::~LaunchPage()
{
#if CONFIG_EN_SUB_THREAD    //是否开启子进程
    LP_ST.KillThread();
#endif
    delete ui;
}
void LaunchPage::TrayIconInit()
{
    //托盘初始化
    QIcon icon = QIcon("logo.png");
    trayIcon = new QSystemTrayIcon(this);
    trayIcon->setIcon(icon);
    trayIcon->setToolTip("郑煤机-掘锚一体机");
    trayIcon->show(); //必须调用，否则托盘图标不显示

    //创建菜单项动作(以下动作只对windows有效)
    minimizeAction = new QAction("隐藏", this);
    connect(minimizeAction, SIGNAL(triggered()), this, SLOT(
                hide()
                )); //绑定信号槽

    restoreAction = new QAction("还原", this);
    connect(restoreAction, SIGNAL(triggered()), this, SLOT(
                showNormal()
                ));


    quitAction = new QAction("退出", this);
    connect(quitAction, &QAction::triggered, this, [this]() {
        // 退出应用程序
        qApp->quit();
    });


    //创建托盘菜单(必须先创建动作，后添加菜单项，还可以加入菜单项图标美化)
    trayIconMenu = new QMenu(this);
    trayIconMenu->addAction(minimizeAction);
    trayIconMenu->addAction(restoreAction);
    trayIconMenu->addSeparator();
    trayIconMenu->addAction(quitAction);
    trayIcon->setContextMenu(trayIconMenu);


//    connect(trayIcon,SIGNAL(activated(QSystemTrayIcon::ActivationReason)),
//            this,SLOT(iconActivated(QSystemTrayIcon::ActivationReason)));

}
void LaunchPage::WinInit(){





    qDebug()<<"正在出初始化!";
    P00_PublicPage* PubPage = new P00_PublicPage();
    qDebug()<<"PubPage"<<PubPage;
    this->hide();
    PubPage->show();

    QList<QStringList> FileData = ConfigFiles().ReadFile_Csv("./ProgramConfig/UI_报警内容文本_配置.csv");
    for (int row = 1; row < FileData.size()-1; ++row)
    {
        bool ok1,ok2;
        uint8_t Dev = FileData.at(row)[0].toUInt(&ok1, 16);
        uint8_t Index = FileData.at(row)[1].toUInt(&ok2, 16);
        //qDebug()<<Dev<<Index;
        AlarmText[Dev][Index].TextColor = FileData.at(row)[2];
        AlarmText[Dev][Index].AlarmText = FileData.at(row)[3] + "->" + FileData.at(row)[4];
        AlarmText[Dev][Index].Troubleshoot = FileData.at(row)[5];
    }

    gPageName["P01"] = "主预览";
    gPageName["P02"] = "屏蔽条件";
    gPageName["P301"] = "油泵设备";
    gPageName["P401"] = "截割设备";
    gPageName["P501"] = "装载设备";
    gPageName["P601"] = "运输设备";
    gPageName["P07"] = "备用设备";
    gPageName["P08"] = "故障记录";
    gPageName["P09"] = "遥控测试";
    gPageName["P10"] = "自动智能";
    gPageName["P11"] = "绝缘检测";
    gPageName["P12.00"] = "网络拓扑";
    gPageName["P12.01"] = "硬件IO 1";
    gPageName["P12.02"] = "硬件IO 2";
    gPageName["P12.03"] = "硬件IO 3";
    gPageName["P12.04"] = "硬件IO 4";
    gPageName["P12.05"] = "硬件IO 3";
    gPageName["P12.06"] = "操作箱 1";
    gPageName["P12.07"] = "操作箱 2";
    gPageName["P12.08"] = "操作箱 3";
    gPageName["P12.09"] = "操作箱 4";
    gPageName["P13"] = "本地控制";
    gPageName["P14"] = "随机图册";
    gPageName["P15"] = "参数设置";
    gPageName["P16"] = "系统设置";

    gPageIndexStr = "P01";

    // 创建实例（建议全局唯一）
    ttsManager = new TTSManager(this);
}